Just Click LLC is a direct importer of inverters, solar charge controllers and electronic components for solar systems.
Low Frequency Solar Inverters starts from 4000 watt with popular models at 6000 watt and 12,000 watt.
They convert 48Vdc to 110/220V 120/240Vac split phase.
The M6048D is built with 80A MPPT solar charger and the M12048D is built with 2 pcs of 60A MPPT solar charger. These MPPT charger is built with a wide PV open circuit voltage of 250vdc and high tracking and conversion efficiency over 98%.
Low frequency Solar inverter gets the name of “low frequency” because they use high speed power transistors to invert the DC voltage to AC power, and it drives transistors at the same power frequency (60 Hz or 50Hz) as the AC sine wave power output voltage. That is much lower than the high frequency inverters working at a few hundreds of thousands Hz or more.
A LF solar inverter has H-bridge PWM directly from battery lines feeding into a low frequency heavy-duty transformer to boost AC voltage from a low level up to 120/240 vac. The low frequency transformer has a secondary function to provide most of the PWM filtering to sine wave.
Thanks to the built-in heavy duty transformer, the M series low frequency solar inverter has a 300% surge output power for 5 seconds and can absorb the electrical surges from inductive loads like motors, pumps, and torque-related tools. Thus, the LF inverter charger is more reliable and better than the high frequency inverter.
We will launch the UL listed version around May in 2022.
Off Grid Solar Inverters without Transformer starts from 3KW up to 5KW.
These off grid solar inverter models don’t have the big heavy-duty transformer commonly seen in a traditional low frequency inverter, thus they are also called transformerless inverters. But strictly speaking, they are not really transformerless. There are small ferrite high frequency transformers, not big heavy iron 50/60 Hz transformers.
They typically drive the switches at a
frequency closer to 100 KHz (100,000 times per second) or much higher, thus allowing for a much smaller, more efficient transformer and overall smaller package.
High frequency inverter has a DC to DC boost first stage that steps
battery voltage up to around 180-200 vdc. Second stage is PWM H-bridge output MOSFET’s that creates the sinewave PWM profile from the high voltage DC. Then the AC output is filtered to sinewave with a toroid L C filter.
The off grid Solar Inverter without Transformer converts DC from battery and PV to AC, it is a combination of power inverter, solar charger and automatic transfer switch. The transformerless design make them compact and lightweight, making the installation much more flexible.
These inverters have DC input from 24Vdc to 48Vdc and AC output voltage at 120Vac and 230Vac. They have different PV input Voc (voltage of open circuit), range from 150Vdc to 450Vdc.
The M3048BP and M5000H-BP inverters can work without batteries, this helps users to harvest power directly from solar array to power loads and eliminate the need for initial battery investment.
They can be stacked up to 6 pcs to increase power, form split phase, or generate three phase.
The BMS port on these inverters can communicate with Sigineer Power LiFePO4 batteries.
Inverter Chargers
Did you ever need a DC to AC power inverter with battery charger, or more, with a built-in automatic transfer switch? We have a huge selection of quality pure sine wave inverter charger transfer switch included for your selection, they are an all in one power package designed for multiple applications. It
converts DC power to AC in battery mode, and when AC input power is available, it automatically
switches the loads to AC power and charges a battery bank. There are two input power sources, DC and AC. When connected to AC power(generator/shore power), the unit will bypass the AC power through it to loads while keep the batteries charged.
Once the AC power is absent, generator cutoff or shore power failure, the inverter will automatically switch to the DC battery source.
We got CE, SONCAP, TUV, UL458, UL1741 and ETL listings for our Inverter Chargers.
Our pure sine wave inverter charger outputs pure sine wave with extraordinarily low THD which matches or even surpasses their high frequency counterparts.
This clean smooth power signal closely resembles the shore power, or even better in some cases.
The pure sine wave inverter charger transfer switch is
available in 600 watts to 12,000 watts, they are capable of offering
stable AC power for your home or business from battery banks.
They also work well for
RV inverter systems, motorhome ,camping world or boat applications.
The built-in 3 ways automatic transfer switch manages the AC power input and switches to the battery in the event of AC power loss.
With a typical transfer time of 10 milliseconds, these transfer switch in inverter chargers is great for complex electronics or an emergency backup power for your home or business as it can easily hold your computer up without data loss.
Inverter models are:
| Watt | Volt | Type | Model |
|---|---|---|---|
| 1.500 | 12 to 100 / 110 / 120 | Inverter Charger | PSW71512NC |
| 1.500 | 12 to 100 / 110 / 120 | Inverter Cjharger | PSW71524NC |
| 2.000 | 12 to 110 / 120 | Inverter Charger | UL2012NC |
| 2.000 | 24 DC to AC 110 / 120 | Inverter Charger | APC2024NC |
| 3.000 | 12 to 110 / 120 | Inverter Charger | APC3012NC |
| 3.000 | 12 to 120 / 240 | Inverter Charger | APC3012D |
| 3.000 | 24 DC to AC 100 / 110 / 120 | Inverter Charger | APC3024NC |
| 3.000 | 24 to 100 / 110 / 120 | High Frequency Inverter Charger | M3024NC |
| 3.000 | 24 to 120 / 240 | Inverter Charger | APC3024D |
| 3.000 | 48 to 110 / 120 | Inverter Charger | APC3048NC |
| 3.000 | 48 to 110 / 120 | High Frequency Inverters | M3048BP |
| 3.000 | 48 to 100 / 110 / 120 | High Frequency Inverter Charger | M3048NC |
| 3.000 | 48 to 120 / 240 | Inverter Charger | APC3048D |
| 4.000 | 12 to 120 / 240 | Inverter Charger | APC4012D |
| 5.000 | 12 DC to AC 110 / 120 | Inverter Charger | APC5012NC |
| 5.000 | 48 to 110 / 120 | Solar Inverter Charger | N5048NC |
| 5.000 | 48 to 220 / 230 / 240 | Solar Inverter Charger | M5000H-48BP |
| 6.000 | 24 to 120 / 240 | Inverter Charger | APC6024D |
| 6.000 | 48 to 120 / 240 | Low Frequency Solar Inverter Charger | M6048D |
| 6.000 | 48 to 120 / 240 | Inverter Charger | S6048D |
| 6.000 | 48 DC to AC 110 / 220 | Inverter Charger | APC6048D |
| 6.000 / 12.000 / 18.000 | 48V to 120/208V 127/220V 220/380V 230/400V 240/415V | Three Phase Inverter Charger | TPH18048NC |
| 10.000 | 48 to 240 | Low Frequency Solar Power Inverter Charger | M10048D |
| 10.000 | 48 to 240 | Low Frequency Solar Power Inverter Charger | HP10024D |
| 12.000 | 48 to 240 | Low Frequency Solar Power Inverter Charger | M12048D |
| 15.000 | 96 to 120/240V 110/220/230V | Inverter Charger | HP15096D |
| 18.000 | 48 to 120/240V 110/220V | Inverter Charger | HP18048D |
| 18.000 | 48 to 120/208V 127/220V | Three Phase Inverter Charger | TPH18048NC |
| 24.000 / 30.000 / 36.000 / 45.000 | 48 to 220/380V 230/400V 240/415V | Three Phase Inverter Charger | TPH45048E |
The
6000W solar inverter is a complete package of
80A MPPT solar charge controller, 60A utility charger, transfer switch and a 6000 watt power inverter.
It converts
48v DC power from battery bank or solar power to alternating current ac of 120/240V ac power.
The 80A solar charge can be hooked up to solar panels up to 5KW with VOC (open circuit voltage) up to 250Vdc.
It is designed for off grid solar systems, offering pure sine wave power for all types of loads.
Built with a 80A utility charger, it can also use AC power as backup in hybrid systems.
The 6000W solar inverter works with most types of batteries on the market. It has RS485 communication with a BMS port (battery management system) to communicate with lithium batteries built with the same protocol.
The highly programmable LCD screen allows users to set a wide range of inverter specs such as
The 6000W solar inverter virtually allows users to change all of its specs within its range. This allows users to set up their own spec for 48 volt Tesla battery modules and other special lithium batteries.
This M10048D 10000 watt solar power inverter is a
10KW 48 volts to 120/240vac power inverter, 80A utility battery charger, 120A MPPT solar charger and 80A transfer switch.
It has high surge of
30000 watts surge output for 5 seconds. Its powerful CPU allows users to configure a wide range of specifications via the LCD.
It supports remote monitoring via APP or remote LCD panel. The BMS port communicates with certain lithium batteries.
This 10000 watt solar power inverter for home is an integration of a 48V to 120/240V 10KW off grid pure sine wave inverter, a 80A AC charger, two pcs of 250Vdc 60A MPPT solar charge controllers and a transfer switch in one package.
Rated at 10,000 watts with 30KW surge, it’s ideal to provide backup AC power for North American homes with frequent power losses or completely off grid.
It is built with state-of-the-art inverter technology with a powerful DSP and allows users to change a wide range of specs such as AC output voltage, frequency, power priority, low/high battery cutoff, charging profiles, etc.
For example, with the M10048D 10000 watt solar power inverter, users can set up their charge and discharge voltages to take full advance of the DC power from 48 volts Tesla modules and other lithium batteries.
Its two 60A MPPT solar chargers can accept two strings of 60A PV input from two solar panel arrays or parallel to accept 120A input from one big PV array. The solar charger has a high efficiency of tracking and conversion.
It works with most types of batteries on the market, its BMS port communicates with lithium battery built with the same protocol.
Unlike our HP series of inverters which have AC load detection on Hot 1, the M10048D 10000 watt solar power inverter has AC load detection on both hotlines, giving out a more accurate calculation of load wattage.
It allows remote monitoring of the inverter system by Wi-Fi module or GPRS module on APP. There is a free Wi-Fi module packed with the solar power inverter for home.
The inverter is easy to install in PV system.
This M12048D solar power inverter for home is a
12KW 48 volts to 120/240vac power inverter, 100A utility battery charger, 120A MPPT solar charger and 80A transfer switch.
It has high surge of
36000 watts surge output for 5 seconds. Its powerful CPU allows users to configure a wide range of specifications via the LCD.
It supports remote monitoring via APP or remote LCD panel. The BMS port communicates with certain lithium batteries.
This 12,000 watt solar power inverter for home is an integration of a 48V to 120/240V 12KW off grid pure sine wave inverter, a 100A AC charger, two pcs of 250Vdc 60A MPPT solar charge controllers and a transfer switch in one package.
Rated at 12KW with 36KW surge, it’s ideal to provide backup AC power for North American homes with frequent power losses or completely off grid.
It is built with state-of-the-art inverter technology with a powerful DSP and allows users to change a wide range of specs such as AC output voltage, frequency, power priority, low/high battery cutoff, charging profiles, etc.
For example, with the M12048D solar power inverter for home, users can set up their charge and discharge voltages to take full advance of the DC power from 48 volts Tesla modules and other lithium batteries.
Its two 60A MPPT solar chargers can accept two strings of 60A PV input from two solar arrays or parallel to accept 120A input from one big PV array.
It works with most types of batteries on the market, its BMS port communicates with lithium battery built with the same protocol.
Unlike our HP series of inverters which have AC load detection on Hot 1, the M12048D inverter has AC load detection on both hotlines, giving out a more accurate calculation of load wattage.
It allows remote monitoring of the inverter system by Wi-Fi module or GPRS module on APP. There is a free Wi-Fi module packed with the solar power inverter for home .
This 3000 watt 24v to 120Volt inverter is a combination of 80A MPPT solar inverter, 60A battery charger and AC auto-transfer switch with a peak DC to AC conversion efficiency of 90%.
Features include stackable capability, overload, short circuit, over-temperature, under & over voltage protection.
Tthe cutting edge M3000H line 120Vac off grid solar inverter chargers with stacking capacity is designed for countries such as the USA, Canada, Puerto Rico, Haiti, Dominica and other American countries with 110V/120V power.
It contains a 80A MPPT solar charger and a utility AC charger.
Its versatile stacking feature allows the 120Vac units to be stacked together to
The highly programmable LCD menu allows users to set a wide range of inverter specs such as
It virtually allows users to change all of its spec within its range.
Free monitoring software is included in the package.
This 3000 watt 48v to 120Volt inverter is a combination of solar inverter, battery charger and AC auto-transfer switch with a peak DC to AC conversion efficiency of 93%.
Features include stackable capability, overload, short circuit, over-temperature, under & over voltage protections.
No Wi-Fi module included in the carton, it is sold separately.
Tthe cutting edge M3000H line 120Vac off grid solar inverter chargers with stacking capacity is designed for countries such as the USA, Canada, Puerto Rico, Haiti, Dominica and other American countries with 110V/120V power.
It contains a 80A MPPT solar charger and a utility AC charger.
Its versatile stacking feature allows the 120Vac units to be stacked together to
The highly programmable LCD menu allows users to set a wide range of inverter specs such as
It virtually allows users to change all of its spec within its range.
Free monitoring software is included in the package.
The M series solar inverters offer a simple, all-in-one installation and flexible programming and will charge virtually any battery chemistry including lithium batteries. With excellent surge capability of 200% for 5 seconds, the M Series will start some of the most demanding 120VAC loads. Perfect for your off-grid house or cabin.
Free monitoring software is included in the package.
It allows remote monitoring by WiFi module or GPRS module.
It has BMS to communicate with our lithium battery powerwalls.
This 3000 watt 48V to 120V solar inverter is a combination of solar inverter, battery charger and AC auto-transfer switch with a peak DC to AC conversion efficiency of 90%.
Features include batteryless operation, stackable capability, wide PV input range of 250Voc, sophisticated protections.
This 3000W solar inverter is off grid, transformerless, designed with for 120Vac power systems.
It converts 48Vdc battery to 120Vac single phase power (adjustable to 100V 110V as well).
Its 80A MPPT solar charger accepts PV input from 120Vdc to 250Vdc, the nominal PV input power is 4000 watts.
The 40A utility charger allows users to charge batteries from a utility or generator as well.
It supports batteryless operation to convert PV power directly to support loads and use utility power as backup, this help users to reduce initial investment on the solar system.
When the battery is fully discharge, the M3048BP inverter will not shut off its solar charger to discharge batteries, it will convert the PV input power to drive the loads.
Its LCD allows users to change virtually all the specs of the inverter, including low/high voltage alarm/cut off, charging voltages, charging current, AC output voltage and freq, etc. It can be stacked up to 6 pcs to increase power or form three-phase 208Vac.
Another important feature is that it can operate without battery connected,
Its versatile stacking feature allows the 3KW solar inverter to be stacked up to 6 pcs.
The highly programmable LCD menu allows users to set a wide range of inverter specs such as
It virtually allows users to change all of its spec within its range.
It allows remote monitoring by WiFi module or GPRS module.
It has BMS to communicate with our lithium battery powerwalls.
This 5000 watt 48v to 120V inverter is a combination of solar inverter, battery charger and AC auto-transfer switch with a peak DC to AC conversion efficiency of 90%.
Features include wide PV input range of 500Voc, sophisticated protections.
This inverter is a new hybrid solar charge inverter, which integrates solar energy storage & AC charging energy storage and AC sine wave output.
It is ideal for AC loads such as household appliances, power tools, industrial equipment, and electronic audio and video equipment.
Features:
This model can’t be parallelled, it can only operate separately.
This 5000 watt 48v to 220/230V/240V inverter is a combination of solar inverter, battery charger and AC auto-transfer switch with a peak DC to AC conversion efficiency of 90%.
Features include batteryless operation, stackable capability, wide PV input range of 450Voc, sophisticated protections.
This 5000W European solar inverter is off grid, transformerless, designed with CE certification for 230Vac power systems such as Europe, Asia, Africa, Australia etc.
It converts 48Vdc battery to 230Vac single phase power (adjustable to 220V 240V as well).
Its 100A MPPT solar charger accepts PV input from 100Vdc to 450Vdc, the max PV input power is 6000 watts.
The 80A utility charger allows users to charge batteries from a utility or generator as well. It supports batteryless operation to convert PV power directly to support loads and use utility power as backup.
Its LCD allows users to change virtually all the specs of the inverter, including low/high voltage alarm/cut off, charging voltages, charging current, AC output voltage and freq, etc. It can be stacked up to 6 pcs to increase power or form three phase 400Vac.
This M5000H-48BP model
only accepts 240Vac input, and outputs only 240Vac. It will not accept 120Vac input, or output 120Vac.
For US customers, it can be powered by 240V power from two hotline lines and output 240Vac by following the below wiring instruction.
Or it can be connected to a separate 240V to 120/240V split phase transformer to get two separate 120V hot lines for 120V loads.
Another important feature is that it can operate without battery connected, this help user to reduce initial investment on the solar system.
Its versatile stacking feature allows the 5KW solar inverter to be stacked up to 6 pcs.
The highly programmable LCD menu allows users to set a wide range of inverter specs such as
It virtually allows users to change all of its spec within its range.
Free monitoring software is included in the package.
It allows remote monitoring by WiFi module or GPRS module.
It has BMS to communicate with our lithium battery powerwalls.
This 1500 Watt inverter charger changes 12V dc to 120V ac Pure Sine Wave. It is a power inverter, battery charger & transfer switch with features dedicated for mobile applications such as work van, sprinter van, cargo van, conversion van, transit van and ice cream van.
Compact, lightweight. The AC output is obtained through GFCI. Features include overload, short circuit, over-temperature, under & over voltage protections.
This 1500 watt inverter charger is a combination of a 1.5KW van power inverter, 50 amp battery charger and AC auto-transfer switch into one complete system with a peak DC and AC conversion efficiency of 80%.
This high efficiency 1500 watt inverter charger converts 12 Volts DC to pure sine-wave AC power at 120 Volts 60 Hz.
Features include built-in GFCI power outlet, overload protection, low battery alarm / shut down, low idle power draw of less than 0.6 Amps.
The van power inverter is packed with unique features and it is the most advanced 1500 watt inverter charger in the market today.
It features power factor corrected, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.
The AC/Battery priority and auto generator start functionality make it suitable to work in either backup power or renewable energy or mobile applications such as work van, sprinter van, cargo van, conversion van , transit van and ice cream van.
When customized to Battery priority mode via a DIP switch, the 1.5KW van power inverter will extract maximum power from external sources and renewable energy systems, with only minimal battery cycles being required. The overloads capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.
In AC priority mode, when utility AC power cuts off, the transfer relay is de-energized and the load is automatically transferred to the inverter output. Once the qualified AC utility is restored, the relay is energized and the load is automatically transferred to AC utility.
The Hard Wire AC Terminal Block offers an option to meet some local council electrical regulations and makes wiring to back up generator easier.
You can also buy a remote LCD panel or Battery Temperature Sensor for this inverter
This 1500 Watt PSW7 inverter charger changes 24V dc to 120V ac Pure Sine Wave. It is a power inverter, battery charger & transfer switch with features dedicated for mobile applications such as work van, sprinter van, cargo van, conversion van, transit van and ice cream van.
Compact, lightweight. The AC output is obtained through GFCI. Features include overload, short circuit, over-temperature, under & over voltage protections.
This 1500 watt PSW7 inverter charger is the most popular and competitive model in our classic PSW7 series.
It’s a combination of a 1.5KW inverter, with intelligent battery charging of 25 amperage and AC auto-transfer switch into one complete system.
This 1500 watt psw7 inverter charger converts 24 Volts DC to 1500 Watts of pure sine-wave AC power at 120 Volts 60 Hz with a peak DC and AC conversion efficiency of 80%.
Features include PFC power factor correction for its powerful battery charger, capability of charging flat batteries, built-in GFCI power outlet, overload protection, low battery alarm / shut down, low idle power consumption of less than 0.4 Amps.
The 1.5KW PSW7 inverter is packed with unique features, and is the most advanced 1500 watt pure sine wave inverter in the market today.
Its battery type selector carries 8 different charging algorithms for batteries such as lead acid, GEL, AGM, lithium batteries.
The AC/Battery priority and auto generator start functionality make it suitable to work in either backup power or renewable energy or mobile applications such as work van, sprinter van, cargo van, conversion van, transit van and ice cream van.
When customized to Battery priority mode via a DIP switch, the 1.5KW van power inverter will extract maximum power from external sources and renewable energy systems, with only minimal battery cycles being required. The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.
In AC priority mode, when utility AC power cuts off, the transfer relay is de-energized and the load is automatically transferred to the inverter output. Once the qualified AC utility is restored, the relay is energized and the load is automatically transferred to the AC utility.
This 2000w pure sine wave inverter is a combination of 2kW power inverter, battery charger and AC auto-transfer switch with a peak DC to AC conversion efficiency of 88%.
Features include 300% surge output, overload, short circuit, over-temperature, under & over voltage protections.
This Power 2000w pure sine wave inverter converts 24 Volt to 120Vac Pure Sine Wave output.
This 24V to 120V 2000w inverter charger is more than just your daily inverter. It is a
three-in-one product:
It is an
inverter
that converts 24V battery voltage DC to AC 120V electricity to power tools and appliances.
A built-in
30 amp transfer switch will automatically switch between shore power and battery-bank power within 10 mili seconds.
A 30 amp multi-stage
battery charger uses AC power from the grid or from a generator to recharge a battery bank.
The battery-type selector on the top of the 2000w pure sine wave inverter allows the ability to adjust the charging voltage to the battery bank.
This 24V 2000w inverter charger is built tough and is
ideal for vehicles such as car, RV, camper etc.
The 2000w inverter charger is available in 12 volt and 48 volt versions, available for 12 volt or 48 volt battery bank or off-grid system.
Inside this 2000w pure sine wave inverter are heavy-duty transformers producing the clean pure sine wave power of low THD. It is able to handle spikes from unstable power supplies in countries with unreliable power system. With a frequency switch, this inverter can be used in countries with a 50hz 120v ac system or 60hz 120v systems. Perfect for Caribbean Island nations and American RV, boat or home.
The reliable transfer switch boasts an average 10 millisecond transfer time, working actually as an uninterruptible power supply with battery backup system.
This 24v 2000w inverter charger is a match set with any existing battery and generator system, as it is capable of accepting an AC power from the generator to charge the batteries and starts the generator when battery voltage drops low.
There is a hard-point 3-wire AC output terminal capable of taking the massive 300% surge rating from the 2000w car inverter all at once. The 6000 w surge rating lasts for 20 seconds, offering ample power for applications such as water pumps, microwaves or any other tough appliances you might throw at it.
This 2000 watt 12v to 120 Volt TSW inverter charger is a combination of true sine wave power inverter, battery charger and AC auto-transfer switch.
Features include 300% surge output, overload, short circuit, over-temperature, under & over voltage protections.
The UL2012NC 2000 watt TSW inverter charger features premium true sine wave performance, hard-to-match pricing and multi products in one package.
It converts 12V Dc from battery power into pure sine wave AC household power.
The TSW inverter features a powerful built-in multi-state battery charger of 70 amp to ensure safe and efficient battery charging and an integrated 30A transfer switch with supplementary breakers.
This provides for a smooth transition of 10ms between shore power and battery power, while the power saver mode to minimize power loss when the TSW inverter is sensing AC loads.
The TSW inverter is built with rugged transformer, ideal for operating motor loads and reducing stress on surge protection circuitry.
Perfect for mobile applications such as
commercial, emergency and recreational vehicles, marine vessels, construction and military equipments, small microwave ovens, computers, plasma television sets, printers, power tools, mini refrigerator and more.
It outputs 2000 watts of continuous clean true sine wave power to sensitive and sophisticated electronics is available with a 1500W GFCI.
Its compact low profile design allows for installation in a variety of locations and the LCD remote display can be mounted anywhere for convenient remote control.
Designed to offer reliable AC power and battery charging to RV’s, boats, trucks, homes and cabins.
This TSW inverter charger features an AC wiring compartment with two string relief connectors to access the AC input and output terminal block, this is where you hard wire your AC input and output.
The 12Vdc remote on/off switch function is available on this inverter with a pin at the AC terminal block, this makes the inverter also manageable from a 12V DC source.
This TSW inverter is set with Automatic Neutral to Ground Connection in the factory, but this connection can be defeated by separating the insulated connectors on the green wire near the AC terminal block, so it will not bond the neutral in any mode of operation.
The ground terminal is used to tie the exposed chassis of the TSW inverter to the DC grounding system with a conductivity of 40 amps, eliminating hazardous high voltage in the event of a leakage.
The temperature controlled cooling DC fan is speed controlled based on internal chamber temperature, battery charging current and inverter output wattage, it reduces fan noise and energy consumption.
When adverse operational conditions are detected, the inverter will initiate a shutdown and power itself off in a healthy manner before any damage can be done.
This 12 volt to 120 Volt pure sine wave inverter charger 3000 watts is a combination of power inverter, battery charger and AC auto-transfer switch with a peak DC to AC conversion efficiency of 88%.
Features include 20A GFCI outlet, 300% surge output, overload, short circuit, over-temperature, under & over voltage protections.
This inverter charger 3000 watts changes 12 Volt to 110V 120Vac Pure Sine Wave output.
It is three products in one:
In our earlier design, the battery voltage must be over 9V for the inverter to be powered on.
This inverter is built with a lithium battery wake-up module which will activate the charger with AC input power even when the battery voltage is 0Vdc.
The battery-type selector on the top of the 3000 watt inverter charger allows the ability to adjust the charging voltage to the battery bank.
This 3000 watts inverter charger is of industrial-grade, capable of withstanding surges of 9000 watts for 20 seconds, and its direct connect terminal block allows you to harness the full 9KW.
It works at nominal 12Volt battery bank, it has different battery shut down voltages, namely 10V and 10.5V, thus allowing different DOD(depth of discharge).
It is built with high efficiency components with an idle consumption of 11 watts in power saver mode, it is great for running your
whole house, business office, large RV, renewable solar, off-grid, mobile and emergency backup power applications that uses 110 or 120 volts AC. This product also has a frequency switch that allows users to operate at either 50 or 60 hertz.
It boasts a maximum of 10 millisecond transfer time with a 30A transfer switch. This feature is great for backup power applications, as the inverter virtually works as uninterrupted power supply (UPS).
The featured battery-type selector helps users regulate the charging voltage according to different batteries. This capability will maximize battery lifespan.
This inverter can power up any loads within its wattage, it can easily power tools on a work truck, such as electric chainsaws, portable grinders, shop vacs, and more. It serves as an automotive inverter for RVs, over-the road trucking, conversion vans and fleet service vehicles without the annoying noise or pollution from a generator.
We also have larger comparable units that can handle higher startup surges of tools with larger electrical requirements, such as an air compressor.
The inverter is marine-graded and is resistant to dust and/or water vapor in the air. This feature is great for boating applications.
The inverter charger 3000 watts comes with Auto Generator Start that starts up a generator and provides charge to the batteries or provides power to your home.
This 3KW inverter charger supports a remote diagnostics LCD screen displaying abnormalities on the system, giving you clear directions to track the issue and troubleshoot.
This 3000 watt 12v to 120/240 Volt Pure Sine Power Converter is a combination of power inverter, battery charger and AC auto-transfer switch with a peak DC to AC conversion efficiency of 88%.
Features include 300% surge output, overload, short circuit, over-temperature, under & over voltage protections.
The battery-type selector on the top of the 3000 watt Pure Sine Power Converter allows the ability to adjust the charging voltage to the battery bank. This 3KW 12V inverter and converter is built tough and ready to operate to its fullest extent.
In our earlier design, the battery voltage must be over 9V for the inverter to be powered on.
This inverter is built with a lithium battery wake-up module which will activate the charger with AC input power even when the battery voltage is 0Vdc.
This 3000 watt 24v to 120 Volt Pure Sine Power Converter is a combination of power inverter, battery charger and AC auto-transfer switch with a peak DC to AC conversion efficiency of 88%.
Features include 300% surge output, overload, short circuit, over-temperature, under & over voltage protections.
This APC3024NC 3000 watt Pure Sine Power Converter changes 24 Volt to 120Vac Pure Sine Wave output.
This 3KW 24V Pure Sine Power Converter is more than just your daily inverter. It is a
three-in-one product:
The battery-type selector on the top of the 3000 watt Pure Sine Power Converter allows the ability to adjust the charging voltage to the battery bank.
This 3KW 24V inverter and converter is built tough and ready to operate to its fullest extent.
This unit is available in 12 volt and 48 volt versions, available for 12 volt or 48 volt battery bank or off-grid system.
Inside of this 3000 watt 12volt inverter charger are heavy duty transformers producing the clean pure sine wave power of low THD. It is able to handle spikes from unstable power supplies in countries with unreliable power system. With a frequency switch, this inverter can be used in countries with a 50hz 120v ac system or 60hz 120v systems. Perfect for
Caribbean Island nations and American RV, boat or home.
The reliable transfer switch boasts an average 10 millisecond transfer time , working actually as a uninterpretable power supply with battery backup system.
This inverter is a match set with any existing battery and generator system, as it is capable of accepting an AC power from generator to charge the batteries and starts the generator when battery voltage drops low.
There is a hard-point 3-wire AC output terminal capable of taking the massive 300% surge rating from the 2000 watt inverter all at once. The 9000 w surge rating lasts for 20 seconds, offering ample power for applications such as water pumps, microwaves or any other tough appliances you might throw at it.
This 3000 watt 24v to 120/240 Volt Pure Sine Power Inverter charger is a combination of power inverter, battery charger and AC auto-transfer switch with a peak DC to AC conversion efficiency of 88%.
Features include 300% surge output, overload, short circuit, over-temperature, under & over voltage protections.
This APC3024D 3000 watt Pure Sine Power inverter charger changes 24 Volt to 120/240Vac Pure Sine Wave output.
This 3KW 24V Pure Sine Power Converter is more than just your daily inverter. It is a
three-in-one product:
The battery-type selector on the top of the 3000 watt Pure Sine Power Converter allows the ability to adjust the charging voltage to the battery bank
.This 3KW 24V inverter and converter is built tough and ready to operate to its fullest extent.
This 48volt to 120 Volt pure sine wave inverter charger 3000 watts is a combination of power inverter, battery charger and AC auto-transfer switch with a peak DC to AC conversion efficiency of 88%.
Features include 300% surge output, overload, short circuit, over-temperature, under & over voltage protections.
This APC3048NC inverter charger 3000 watts changes 48 Volt to 110V 120Vac Pure Sine Wave output.
It is
three products in one:
The battery-type selector on the top of the 3000 watt inverter charger allows the ability to adjust the charging voltage to the battery bank.
This 3000 watts inverter charger is of industrial-grade, capable of withstanding surges of 9000 watts for 20 seconds, and its direct connect terminal block allows you to harness the full 9KW.
It works at nominal 48Volt battery bank with operational battery voltage range of 40Vdc to 64 Volt, it has different battery shut down voltages, namely 40V and 42V, thus allowing different DOD(depth of discharge).
It is built with high efficiency components with an idle consumption of 11 watts in power saver mode, it is great for
running your whole house, business office,
large RV, renewable solar, off-grid, mobile and emergency backup power applications that uses 110 or 120 volts AC. This product also has a frequency switch that allows users to operate at either 50 or 60 hertz.
It boasts a maximum of 10 millisecond transfer time with a 30A transfer switch. This feature is great for backup power applications, as the inverter virtually works as uninterrupted power supply (UPS).
The featured battery-type selector helps user regulate the charging voltage according to different batteries. This capability will maximize battery lifespan.
This 3000 watt inverter charger is also available in 12 volt and 24 volt versions with identical performance.
This inverter can power up any loads within its wattage, it can easily power tools on a work truck, such as electric chainsaws, portable grinders, shop vacs, and more. It serves as an automotive inverter for RVs, over-the road trucking, conversion vans and fleet service vehicles without the annoying noise or pollution from a generator.
We also have larger comparable units that can handle higher startup surges of tools with larger electrical requirements, such as an air compressor.
The inverter is marine-graded and is resistant to dust and/or water vapor in the air. This feature is great for boating applications.
The inverter charger 3000 watts comes with Auto Generator Start that starts up a generator and provides charge to the batteries or provides power to your home.
This 3KW inverter charger supports a remote diagnostics LCD screen displaying abnormalities on the system, giving you clear directions to track the issue and troubleshoot.
This 48volt to 120/240V Volt pure sine wave 3000 watts inverter charger is a power inverter, battery charger and transfer switch. It outputs 12.5 amp on 240Vac(3000 watts), and 12.5 amps on each of its two hot lines.
Features include 300% surge output, overload, short circuit, over-temperature, under & over voltage protections.
This APC3048D inverter charger 3000 watts changes 48 Volt to 120/240Vac Split Phase Pure Sine Wave output.
It is
three products in one:
The battery-type selector on the top of the 3000 watt inverter charger allows the ability to adjust the charging voltage to the battery bank.
This 3000 watts inverter charger is of industrial-grade, capable of withstanding surges of 9000 watts for 20 seconds, and its direct connect terminal block allows you to harness the full 9KW.
It works at nominal 48Volt battery array with operational battery voltage range of 40Vdc to 64 Volt, it has different battery shut down voltages, namely 40V and 42V, thus allowing different DOD(depth of discharge).
It is built with high efficiency components with an idle consumption of 11 watts in power saver mode, it is great for running your
whole house, business office, large RV, renewable solar, off-grid, mobile and emergency backup power applications that uses 120 or 240 volts AC at either 50 or 60 hertz. Ideal for 230Vac split phase well pump ranging from 1.5HP to 3HP or off grid solar panel systems.
It boasts a maximum of 10 millisecond transfer time with a 30A transfer switch. This feature is great for backup power applications, as the inverter virtually works as uninterrupted power supply (UPS).
The featured battery-type selector helps the user regulate the charging voltage according to different batteries. This capability will maximize battery lifespan.
We also have larger comparable units that can handle higher startup surges of tools with larger electrical requirements, such as an air compressor.
The inverter is marine-graded and is resistant to dust and/or water vapor in the air. This feature is great for boating applications.
The inverter charger 3000 watts comes with Auto Generator Start that starts up a generator and provides charge to the batteries or provides power to your home.
This 3KW inverter charger supports a remote diagnostics LCD screen displaying abnormalities on the system, giving you clear directions to track the issue and troubleshoot.
This 4000 watt 12v to 120/240 Volt Pure Sine Power Converter is a combination of power inverter, battery charger and AC auto-transfer switch with a peak DC to AC conversion efficiency of 88%.
Features include 300% surge output, overload, short circuit, over-temperature, under & over voltage protections.
This 4000 watt Pure Sine Power Converter changes 12Volt to 120/240Vac Pure Sine Wave output.
This 4KW 12V Pure Sine Power Converter is more than just your daily inverter. It is a
three-in-one product:
The battery-type selector on the top of the 4000 watt Pure Sine Power Converter allows the ability to adjust the charging voltage to the battery bank
.This 3KW 12V inverter and converter is built tough and ready to operate to its fullest extent.
This is a low frequency transformer based
5000 watt power inverter with 12V input.
It’s a
combination of pure sine wave
power inverter, 140A battery charger and power transfer switch with a peak efficiency of 88%.
The industrial grade global LF design of
300% surge of 15,000 watt output is great for starting up demanding loads in 12V systems in RV, boat, truck, bus, semi, trailer etc.
This model is an industrial grade transformer based low frequency inverter.
The 5000 watt power inverter charger with pure sine wave output is a combination of 12
volt power inverter, 140 amp battery charger and AC auto-transfer switch with a peak efficiency of 88%.
It will output a continuous power of 5000 watts at 120 volts AC, and also a 300% surge capacity of 15,000 watt for up to 20 seconds. This 15KW surges runs many inductive tools and appliances easier with high startup surges, like electric chainsaws, portable grinders, refrigerators, freezers, microwaves and blow dryers.
The 5000 watt power inverter accepts 12 volts DC input, which is great for travel trailer, vehicle upfitting, semi, RV and boat applications with a 12 volt battery system.
The low frequency inverter powers any type of loads, including Portable Induction Cooktop, microwave oven, electronic equipments.
The automatic transfer switch on this LF inverter is great for emergency backup power applications, the switch keeps the power supply uninterrupted in the event of power outages. When the LF inverter charger is connected to shore power, once the loss of input AC electricity is detected, it will start pulling energy from battery bank within 10 miliseconds to keep the power supply constant.
The AC/battery priority and auto generator start functionality make it suitable to work in either backup power or renewable energy applications. When set to battery priority mode, the any power combi inverter will extract maximum power from external sources and renewable energy systems, with only minimal battery cycles being required, this greatly prolongs battery lifespan.
In AC priority mode, when utility AC power cuts off, the load is automatically transferred to the low frequency inverter ‘s output. Once the qualified AC power is regained, the load is automatically transferred to AC power.
With auto generator start, the LF inverter is also able to command the backup generator to start when the battery voltage goes low.
Other common applications for this inverter consist of off-grid cabins, mobile business or mobile office, and running camping equipments.
This 5000 watt power inverter also has an optional LCD remote port, allowing you to turn the product on and off and monitor the operational status from a distance.
This 6Kw Tesla battery inverter converts 24vdc from Tesla Model S modules to 120V 240vac split phase. It is built with a battery charger with a charging algorithm tailored to the Tesla Model S module, it also works with the lead acid, AGM, GEL batteries.
Features include 300% surge output, overload, short circuit, over-temperature, under & over voltage protections.
This 6 kW 24vdc 120/240vac inverter charger is designed with voltage setting for Tesla Model S battery modules , it provides the perfect power system for 24v Recreational Vehicles (RV) and boat applications. This inverter supports the specific charge and operating voltages of the Tesla Model S battery modules from 18V to 25Vdc
It works with Tesla Model S 24vdc lithium battery module with voltage settings with tailored algorithm at battery type selector 9.
The battery charger also works with the lead acid, AGM, GEL batteries, etc.
It is a 6KVA inverter, battery charger and transfer switch in one package.
The built-in 85 amp battery charger accepts generator power or existing grid power to maintain a charge on batteries.
The inverter 24Vdc to 240Vac works at nominal 24Volt battery bank , and is capable of 120/240 volts AC output, with full 6000 watts available at 240Vac ( two 120Vac hot lines ) and a max of 3000 watts between each 120Vac hot line and neutral.
It is your average every-day power inverter, it gives you’re an unsurpassed surge output power of 18000 watts for 20 seconds and a peak DC-AC efficiency of 88%.
The 6KVA inverter is built with high efficiency components with an idle consumption of 15 watts in power saver mode, it is great for running your whole house, business office or large RV.
Its 110/220V split-phase power output brings smooth integration with traditional North American electrical wiring practices while keeps the flexibility to power 110Vac and/or 220vac at loads at the same time.
Great for home and shop applications with a 220 power distribution panel in place.
There are four connections: L1, L2, neutral, and ground. On the input side, the input neutral is not required, only L1, L2, and ground are required to be connected.
On the output side, either L1 or L2 to neutral will provide 120 VAC. The L1 to L2 will provide 240Vac.
Because of this, it may also be commonly referred to as a 3-wire, single-phase, mid-point neutral 240 volt inverter.
The rugged split-phase inverter allows a 100% imbalance.
You can run 240v loads such as 240v welder, clothes dryer, well pumps, water heaters, electric range by connecting to the two 120v output terminals.
It accepts 240 volts AC with input voltage range of 160-264Vac to bypass AC input and recharge batteries.
This 6KVA inverter works with both 60hz and 50hz electronics.
The output frequency can be manually set at 50 or 60 Hz through the DIP switch, thus it virtually conforms to most electrical systems worldwide.
However, the inverter 24Vdc to 240Vac can utilize grid-power or generator power to charge the batteries and transfer the power to your application. It’s built with a seamless transition transfer switch. If the grid power fails, it becomes a true UPS in emergency situations and natural disasters.
The inverter 24Vdc to 240Vac comes with Auto Generator Start that starts up a generator and provides charge to the batteries or provides power to your home.
This inverter charger supports a remote diagnostics LCD screen displaying abnormalities on the system, giving you clear directions to track the issue and troubleshoot.
Currently, we offer a free remote LCD panel and BTS in the package.
This 6000W inverter charger works from 48 volt to 120/240 volt. It is a combination of power inverter, AC battery charger and AC transfer switch.
The 6000W solar inverter is a complete package of 60A utility charger, transfer switch and a 6000 watt power inverter.
It converts 48v DC power from battery bank or solar power to alternating current ac of 240V ac power.
It is designed for
off grid solar systems, offering pure sine wave power for all types of loads.
Built with a big copper transformer, it is also called low frequency inverter charger.
It has RS485 communication with a BMS port (battery management system) to communicate with lithium batteries built with the same protocol .
The highly programmable LCD screen allows users to set a wide range of inverter specs such as
It virtually allows users to change all of its specs within its range. This allows users to set up their own spec for Tesla modules and other special lithium batteries.
It allows real time remote monitoring by remote LCD(sold separately), WiFi module or GPRS module. There is a free Wi-Fi module included in this package.
This 6000 watt inverter 48v to 110V/220V is a perfect power inverter charger for sump pump. Its 300% surge capacity can run high HP pumps.
It works with deep cycle battery to create a backup system to run a sump pump during power outage.
Features include 300% surge output, overload, short circuit, over-temperature, under & over voltage protections.
This 6000 Watt 48V to 110/220 volt inverter charger for sump pump is built for large inductive loads at home, it is capable of delivering 6000 watts with an exceptional 300% surge of 18,000 watts for 20 seconds, ideal for driving power hungry loads such as sump pump with a strong current draw and locked rotor amperage. It can start a sump pump of 3 horsepower size.
This 6KW inverter charger for sump pump features a big transformer to run a sump pump smoother.
The robust UI transformer with good isolation between DC and AC, it works with 88% peak efficiency and an idle consumption of 15 watts in power saver mode.
This 6000 watt inverter charger for sump pump is built with UPS function to give continuous power supply for big hp pumps during a power outage; it can detect the loss of power and switch over to deep cycle battery backup system seamlessly to keep the loads powered on. The transfer switch is 80A.
The built-in 50A battery charger will charge the batteries promptly.
It is a very reliable pure sine wave inverter outputting clean AC power with a THD less than 10%.
For challenging startup demands, this 6KW power inverter for sump pump can start water pumps, motors and air compressors without overloading itself.
This is the most rugged 6000 watt power inverter for sump on market.
For APC6048D models, the battery type selector position of “9” is customized with a special battery algorithm to work with Tesla Model S and Model X lithium-ion battery modules, that is
If you are looking for a similar 6000 watt inverter charger with 24Vdc input, pls check out our 6000 Watt 24 Volt to 120/240 Vac Split Phase Inverter Charger
Currently, we offer a free remote LCD panel and BTS in the package.
18,000 Watt 48V to 120/208V Three Phase Inverter Charger | Off Grid | Pure Sine Wave | Transformer Based
This three phase inverter chargers adopt MOSFETs in comparison to the commonly seen IGBT and IPM (intelligent power modules) counterparts.
Such kind of three phase inverter chargers are rare on the market in that most MOSFETs are rated at 12Vdc to 48Vdc, it requires special design to handle the strong DC input currently.
With our know-how on some very demanding inverter chargers such as 5Kw 12Vdc 120Vac inverter charger, our team is able to develop 48Vdc three phase inverter chargers up to 45KW and 24Vdc ones up to 18KW.
The MOSFETs are more cost-effective and easier to replace in the event of failure.
With one big transformer on each phase, our three-phase inverter chargers are not only capable of supporting 100% unbalance load but also delivering very clean power. The average THD is a mere 5%.
It is built with power saver mode, strong charging current, protocol communication or CAN communication.
These models are built to order, we need 50 days for production.
This 10000 watt inverter converts 24 volt to 120/240vac split phase pure sine wave, it is a combination of 10KW power inverter, 150A battery charger and AC auto-transfer switch with a peak DC to AC conversion efficiency of 90%.
This 10KW inverter is probably the only commercial transformer-based 24Vdc inverter charger in the world. It comes with in-built 83 Amp transfer switch and circuit breaker. The AC output is obtained through a hardwire connection.
The 10000 watt inverter with 24 volt to 120/240Volt split phase output is a unique model.
For a 10,000 watt inverter with 24Vdc input, it is easy to be achieved on the high frequency platform, but a challenge when it comes to low frequency.
As the DC input current goes to as high as 600 Amps, only the most efficient and robust power modules will handle that.
This power package includes 10000 watt pure sine dc to ac power inverter, 150 amp 24Vdc battery charger and 83A transfer switch.
Our 24 volt DC input is much safer when it comes to electrical safety, and the 24 volt simplifies battery bank configuration and complies with a wider range of solar chargers when the inverter is integrated into solar systems.
This 10000 watt inverter charger takes a 240Vac input from grid power or generators (two hot lines of 120Vac each in split phase area or 240Vac single phase) and outputs 120Vac/240Vac at 50 or 60Hz . The output voltage can also be calibrated to 220Vac or 230Vac in factory, so the inverter is actually operable in the majority electrical systems in the world.
This 10000 watt inverter is great for emergency backup power, renewable energy, hunting cabin or off-grid vacation home as it gives you access to 10000 watts of continuous power and 30,000 watts of surge power (to 20 seconds) when a power outage occurs.
This top-of-the-line high power inverter is built with latest DC-to-AC inverter technology, it performs with very high Dc to AC efficiency of 90%, 150 watt idle consumption, sharply lower than that of competing models.
Under full linear load, there is a max 10% THD at nominal battery voltage(24Vdc) and max 20% THD at low battery voltage cut off point(20Vdc).
Its AC terminal block is designed to be hard wired to AC outlets for power tools etc.
It’s also built to work in harsh conditions with fluctuating voltage, heat and temperature. And it’s protected from humidity or dust and dirt thanks to its marine-coated or “conformal-coated” boards. This inverter provides the
reliability for business or residential emergency backup power systems.
This
96Vdc 15000 watt off grid pure sine wave
inverter charger is tailored with
voltages settings for Tesla Model 3 battery module.
It
converts 96v to 120/240V 60Hz split phase.
Ideal to work with grid tie inverters in ac coupled solar energy storage systems.
It works with most traditional batteries on the market as well.
Features include
60Hz/62.5Hz freq switch, overload, short circuit, over-temperature, under & over voltage protection.
There is no solar charger built in the stock models. If you need a solar charger, pls specify before order.
This new 15000 watt 96Vdc to 120/240VAC coupled inverter charger is developed in joint R&D efforts between Sigineer and EV pro/guru Jack Rickard of EVTV .
It is built with special spec to work with Tesla Model 3 and Model S lithium ion battery modules.
15KW 96V Inverter Battery Type Selector 7, 8, 9 Voltage Setting:
| Battery Type Selector | 7 | 8 | 9 |
|---|---|---|---|
| Low Battery Voltage Alarm(SW1@0) | 75V | 81V | 74V |
| Low Battery Voltage Cutoff(SW1 @0) | 73.6V | 80V | 72V |
| Low Battery Voltage Alarm(SW1 @1) | 79V | 85V | 78V |
| Low Battery Voltage Cutoff(SW1 @1) | 77.6V | 84V | 76V |
| Battery Charger Cutoff | 89V | 98V | 96V |
| High Battery Voltage Alarm | 94V | 103V | 101V |
| High Battery Voltage Cutoff | 96V | 105V | 102V |
Note
If you are looking for large enough inverter charger with lithium battery spec for your whole house, this is the right one to opt for.
Although the inverter is
designed for Tesla batteries, its spec also
works with other EV battery modules with proper setup, such as Nissan Leaf.
The Leaf battery cell is rated at 3.75Vdc, Max 4.1Vdc min 3.0Vdc, our 8th charging algorithm with work with 26 pcs of them.
Our 15000 watt power inverter features Dry Contacts Providing Frequency Switch Between 60Hz / 62.5Hz as the secondary charge control of on grid inverter .
It can control excess energy from the GT batteryless inverter when the battery bank reaches a voltage within the manufacturer’s limit.
To accomplish this, you can use a voltage-controlled relay to close the dry contact to switch the output freq from 60hz to 62.5Hz, shutting off the grid tie inverter system.
Our 15000 watt pure sine wave ac coupled inverter is also a DC to AC battery charger & transfer switch.
This 48Vdc 18000 watt off grid pure sine wave inverter charger is powerful unit based on 48Vdc. It converts 48v to 18KW 120/240V 60Hz/62.5hz split phase with 54KW power surge. It can retrofit grid-tie inverters into ac coupled solar energy storage systems by simply connecting the GT inverter AC output to its AC output. Features include 60Hz/62.5Hz freq switch, overload, short circuit, over-temperature, under & over-voltage protection.
This 18000 watt 48Vdc to 120/240V 60hz/62.hz inverter charger is one of its kind.
If you are looking for
large enough inverter charger with lithium battery spec for your whole house, this is the right one to opt for.
The 18000 watt inverter of 48 volt to 120/240Volt is a pioneering low frequency inverter charger compliant to UL 1741 safety standards.
This full sine wave power inverter was designed with top quality and durability in mind and is built to survive 10+ years in the harshest conditions (and has met and exceeded those expectations).
It is commonplace to use a fuel-powered generator to power tools and appliances off-the-grid, but this is a terribly inefficient and environmentally harmful way to make AC power due to the carbon dioxide emissions.
You can save the planet by switching to a green power inverter and at the same time save your wallet too if you’re buying our cost-effective 18000 watt inverter as it is a three-in-one product: power inverter, battery charger and transfer switch.
The 18000 watt inverter gives out
300% surge power of 54KW for 20 seconds to meet your household or business’s energy needs, meaning, you no longer have to oversize inverter wattage to meet high surges from loads, less initial investment.
Our full sine wave 18KW inverter works with very little power loss, outputs an average THD of 3% , its idle consumption is 200 watts, and its peak DC to AC efficiency is notably 90% .
It will significantly outperform any other competing 18KW inverter models in terms of operating costs over the long-term as it reduces battery discharge cycles and prolongs battery life.
The built-in transfer switch allows it to automatically switch between battery bank and shore power (or generators) with a transfer time of 10 mili seconds.
If you are using a generator instead of utility power as backup, the auto generator starter on the full sine wave inverter will automatically start the generator when battery voltage is low enough.
It gives emergency backup power for your residences and business, or reliable electricity to your hunting cabin or off-grid vacation home.
It is built-in 60 amp battery charger uses AC power, from the grid or from a generator, to recharge a battery bank.
This UL 1741 compliant 18KW inverter is capable of outputting 18KW at 40 degrees Celsius and withstanding thermal fluctuations because of its over-temperature protection and thermally-controlled fans.
It’s protected from humidity or airborne dust and dirt thanks to its conformal-coated (or “marine-coated”) boards.
This UL 1741 compliant 18000 watt inverter is split-phase, it requires a 240Vac input (single-phase 240Vac or two hot lines of 120Vac), and will output 120 or 240Vac at 60 or 62.5Hz. The output winding is center-tapped and the center tap connected to a grounded neutral.
Every percentage of power efficiency matters in large power systems, a low efficiency inverter saves you pennies at startup but steals pounds away from you in the long run.
Make the right choice when build the next renewable power system for your sustainable living.
This HP18048D inverter has a set of algorithm customized for the Tesla Model S 48vdc lithium battery module on battery type selector 9
18,000 Watt 48V to 120/208V Three Phase Inverter Charger | Off Grid | Pure Sine Wave | Transformer Based
This three phase inverter chargers adopt MOSFETs in comparison to the commonly seen IGBT and IPM (intelligent power modules) counterparts.
Such kind of three phase inverter chargers are rare on the market in that most MOSFETs are rated at 12Vdc to 48Vdc, it requires special design to handle the strong DC input currently.
With our know-how on some very demanding inverter chargers such as 5Kw 12Vdc 120Vac inverter charger, our team is able to develop 48Vdc three phase inverter chargers up to 45KW and 48Vdc ones up to 18KW.
The MOSFETs are more cost-effective and easier to replace in the event of failure.
With one big transformer on each phase, our three-phase inverter chargers are not only capable of supporting 100% unbalance load but also delivering very clean power. The average THD is a mere 5%.
It is built with power saver mode, strong charging current, protocol communication or CAN communication.
The TPH18048NC is designed for vehicles to give users 18KW power on 48Vdc input.
These models are built to order, we need 50 days for production.
45,000 Watt 48V to 220/380V 3 Phase Inverter Charger | Off Grid | Pure Sine Wave | Transformer Based.
This three phase inverter chargers adopt MOSFETs in comparison to the commonly seen IGBT and IPM (intelligent power modules) counterparts.
Such kind of three phase inverter chargers are rare on the market in that most MOSFETs are rated at 12Vdc to 48Vdc, it requires special design to handle the strong DC input currently.
With our know-how on some very demanding inverter chargers such as 5Kw 12Vdc 120Vac inverter charger, our team is able to develop 48Vdc three phase inverter chargers up to 45KW and 24Vdc ones up to 18KW.
The MOSFETs are more cost-effective and easier to replace in the event of failure.
With one big transformer on each phase, our three-phase inverter chargers are not only capable of supporting 100% unbalance load but also delivering very clean power. The average THD is a mere 5%.
It is built with power saver mode, strong charging current, protocol communication or CAN communication.
These models are built to order, we need 50 days for production.